图片名称

How to deal with oxidized white spots on stainless steel pipe fittings

White spots are formed on the surface, and corresponding treatment must be made at this time, but how should we deal with it?
   1. Surface polishing method.
   Polishing can fill the pores of stainless steel pipes with the ground aluminum powder.
  2. High voltage and high current density impact method.
  In the early stage of anodizing, high-voltage and high-current impacts are used, so that large and small stainless steel pipes that were previously cut by impurities are connected into pieces by high current impact.
   3. Exterior shot peening method.
   Because the power of shot peening will be greatly improved, the effect of such stainless steel pipe fittings after anodizing and dyeing will be surprisingly good.

RELATED NEWS

What can painted galvanized steel coil materials do

The main application industries of painted galvanized steel coils: a large number of galvanized sheets are used in automobile manufacturing, refrigerators, construction,

2022

06-23

How to store pre-painted galvanized steel coil products

Pre-painted galvanized steel coils should be stored in a dry and ventilated indoor environment to avoid open storage. Condensation is very likely to occur in places with large temperature differences.

2022

06-27

Recommendations for the selection and use of pre-painted galvanized steel coils

The color-coated steel plate using pre-painted galvanized steel coil as the substrate, in addition to zinc protection, the organic coating on the zinc layer plays a role of covering and isolation

2022

06-29

Pre-painted galvanized steel coil installation depends on what to fix

Pre-painted galvanized steel coils can be installed in two ways: penetrating and concealed. Penetrating fixing is the most common way to install pre-painted galvanized steel coils on roofs and walls,

2022

07-01

< 1...252627...31 >

ONLINE MESSAGE

Submit Message