图片名称

How to store pre-painted galvanized steel coil products

1. Pre-painted galvanized steel coils should be stored in a dry and ventilated indoor environment to avoid open storage. Condensation is very likely to occur in places with large temperature differences.
2. The pre-painted galvanized steel coil should be stored in a clean and tidy environment to avoid the intrusion of various corrosive media.
3. The ground of the storage site should be flat, free of hard objects and have sufficient load-bearing capacity.

Prepainted Galvanized Steel Coil suppliers

4. Horizontal steel coils should be placed on rubber pads, skids, brackets and other devices, and the strap locks should be facing upwards, and should not be placed directly on the ground or transport tools.
5. In order to avoid pressure injury, steel coils are usually not stored in stacks. When steel coils are stacked and stored, the number of stacking layers should be strictly limited, and the steel coils with large weight and size should be placed below.
6. The mechanical properties and partial coating properties of pre-painted galvanized steel coils, as well as pencil hardness, T-bend value, impact energy value, etc., may change with the extension of storage time. Follow the principle of first-in-first-use when using.
7. There should be enough space in the storage site for lifting equipment.
8. Reasonable arrangements should be made for the storage location of steel plates and coils to facilitate access, and unnecessary movements should be minimized.
9. Absolutely avoid being immersed in water.
10. It is not recommended to store a large amount of products in the factory area with more carbon dioxide, and at the same time, try to shorten the storage period of the products that have been stored.

Prepainted,Galvanized,Steel,Coil,suppliers,Prepainted,Galvanized,Steel,Coil,price

RELATED NEWS

The difference between precision steel pipe and seamless steel pipe

The main feature of seamless steel pipe is that it has no welded seams and can withstand greater pressure. Products can be very rough as-cast or cold drawn.

2022

04-06

Three New Processes for the Production of Seamless Steel Tubes in the World in the 21st Century

The PQF, CPS and PAM tube rolling processes developed in the world in the last ten years will become three new processes for the production of seamless steel pipes in the world in the 21st century.

2022

04-08

What should be paid attention to when sealing the wear-resistant steel plate

The pressure test of the wear-resistant steel plate can ensure that its shape can remain as it is, which can be selected according to the properties of the wear-resistant steel plate.

2022

04-12

Why choose high temperature plasma cutting technology for wear-resistant steel plate

The cutting technology of wear-resistant steel plates has been greatly improved. In the past, cold-rolled cutting was used for cutting wear-resistant steel plates, but this cutting technology is not conducive to maintaining the shape of wear-resistant steel plates to a certain extent.

2022

04-14

< 1...181920...31 >

ONLINE MESSAGE

Submit Message