图片名称

Classification of Prepainted Galvanized Steel Coil

Earlier we introduced what is Prepainted Galvanized Steel Coil. It is mentioned that Prepainted Galvanized Steel Coil uses hot-dip galvanized sheet, hot-dip galvanized steel sheet, electro-galvanized sheet, etc. as the substrate. After surface pretreatment (chemical degreasing and chemical conversion treatment), a layer of or Several layers of organic coatings, followed by baking and curing products. So it can be seen from this that the classification of Prepainted Galvanized Steel Coil is distinguished by these three substrates.

quality Prepainted Galvanized Steel Coil

Prepainted Galvanized Steel Coil hot-dip galvanized substrate
The product obtained by coating the organic paint on the hot-dip galvanized steel sheet is the hot-dip galvanized color-coated steel sheet. In addition to the protective effect of zinc, the hot-dip galvanized color-coated sheet also has an organic coating on the surface to insulate and protect and prevent rust, and has a longer service life than hot-dip galvanized sheet. The zinc content of the hot-dip galvanized substrate is generally 180g/m2 (double-sided), and the maximum zinc content of the hot-dip galvanized substrate for building exterior is 275g/m2.

Prepainted Galvanized Steel Coil hot-dip aluminum-zinc substrate
Hot-dip aluminum-zinc steel (55% Al-Zn) is used as the newly coated substrate, usually containing 150g/㎡ (double-sided) of aluminum and zinc. The corrosion resistance of hot-dip galvanized sheet is 2-5 times that of hot-dip galvanized sheet. Continuous or intermittent use at temperatures as high as 490 ℃ will not severely oxidize or produce scale. The ability to reflect heat and light is twice that of hot-dip galvanized steel, and the reflectivity is greater than 0.75, which is an ideal building material for energy saving.

Prepainted Galvanized Steel Coil
The electro-galvanized sheet is used as the substrate, and the product obtained by coating with organic paint and baking is electro-galvanized color-coated sheet. Because the zinc layer of the electro-galvanized sheet is thin, the zinc content is usually 20/20g/m2, so this product is not suitable for use Make walls, roofs, etc. outdoors. But because of its beautiful appearance and excellent processing performance, it can be mainly used for home appliances, audio, steel furniture, interior decoration, etc.

quality,Prepainted,Galvanized,Steel,Coil

RELATED NEWS

Process and characteristics of hot rolled steel

Hot rolling uses slabs (mainly continuous casting slabs) as raw materials, and after heating, strips are made by rough rolling mills and finishing mills. The hot steel strip coming out of the last rolling mill of finishing rolling is cooled to the set temperature by laminar flow

2022

05-19

What should be paid attention to when transporting color-coated rolls

The color-coated board should be transported in the correct way, so as to ensure that the product is in good condition after arriving at the destination.

2022

05-23

Factors affecting the cooling and bending of color-coated aluminum coils

Color-coated aluminum coils have been widely used in the construction industry for their anti-corrosion and thermal insulation properties.

2022

05-25

The development history of color-coated galvanized steel coil

After the color-coated galvanized steel coil was introduced in the United States in 1936, the first application in construction was the movable shutters, weatherboards and other parts.

2022

05-27

< 1...222324...31 >

ONLINE MESSAGE

Submit Message