Welcome to Shandong Charming Steel Co.,Ltd ！
Tel : 0086 18264535555 E-mail : cmgc@sdcmsteel.cn
Several problems should be paid attention to in surface treatment of quality Stainless steel profile
The surface quality of quality Stainless steel profile mainly depends on the pickling process after heat treatment. If the surface oxide scale formed by the previous heat treatment process is thick or the structure is uneven, pickling cannot improve the surface finish and uniformity. Therefore, sufficient attention should be paid to the heating of the heat treatment or the surface cleaning before the heat treatment.
If the thickness of the oxide scale on the surface of the quality Stainless steel profile is not uniform, the surface finish of the base material at the thickness is also different. Evenly. Therefore, the oxide scale must be uniformly formed during the heat treatment and heating process. In order to meet this requirement, we must pay attention to the following issues: If oil adheres to the surface of the workpiece during the heating process, the thickness of the oxide scale of the oil-attached part is different from that of other parts, and carburization will occur. The carburized part of the oxidized base metal will be severely corroded by acid. The operator's fingerprint is also affected when it is attached to the workpiece. Therefore, the operator shall not directly touch the stainless steel material with his hands, and shall not stain the work piece with new oil. Clean gloves must be worn during operation.
If lubricating oil is attached to the surface of the workpiece during cold working, it must be fully degreased in trichloroethylene pupa degreaser and caustic soda solution, then washed with warm water, and then heat treated. If there are impurities on the surface, especially organic matter or ash attached to the workpiece, heating will inevitably affect the oxide scale.
In addition, there are many details in the quality inspection process that require the operator's attention. Therefore, the operator's own technical quality has become the key to ensuring the quality of products such as the quality stainless steel profile.
quality,Stainless,steel,profile
Next Page
RELATED NEWS
Specifications and characteristics of stainless steel coil
Stainless steel coil is often used in our daily life. This material can be applied to food equipment, chemical equipment, and of course, it can also be applied to equipment in the atomic energy industry.
2021
06-02
What is the difference between carbon steel pipe and carbon steel coil pipe
Carbon steel pipe made of carbon steel coil pipe is a seam pipe. Compared with seamless steel pipe, the quality of seamless steel pipe is better than that of seam pipe due to the quality assurance of material and weld. The pressure components of pressure equipment must use seamless steel pipes. Generally, non-pressure-bearing structures or structural parts can use carbon steel coil pipes with slits.
2021
06-09
Introduction to basic knowledge of hot rolled steel coil
Hot rolled steel coil is a steel plate made of slab as raw material, heated by rough rolling and finishing rolling mill. Hot rolled steel coil is an important steel variety, which mainly reflects the needs of industrialization. It has excellent properties such as high strength, good toughness, easy processing and forming, and good weldability.
2021
06-17
What are the advantages of galvanized steel sheet
As the name suggests, galvanized steel sheet is a steel plate coated with a layer of zinc. Galvanized steel sheet is one of the frequently used economical and effective methods to avoid steel plate rust. Because of its high cost performance, galvanized steel sheet is widely used. Used in the production of outdoor bulletin boards.
2021
06-24
ONLINE MESSAGE
Contact Us
Tel : 0086 18264535555
Email : cmgc@sdcmsteel.cn
WhatsApp：0086 18264535555
Add : Phoenix Industrial Park, Dongchangfu District, Liaocheng City, Shandong Province