图片名称

How to store pre-painted galvanized steel coil products

1. Pre-painted galvanized steel coils should be stored in a dry and ventilated indoor environment to avoid open storage. Condensation is very likely to occur in places with large temperature differences.
2. The pre-painted galvanized steel coil should be stored in a clean and tidy environment to avoid the intrusion of various corrosive media.
3. The ground of the storage site should be flat, free of hard objects and have sufficient load-bearing capacity.

Prepainted Galvanized Steel Coil suppliers

4. Horizontal steel coils should be placed on rubber pads, skids, brackets and other devices, and the strap locks should be facing upwards, and should not be placed directly on the ground or transport tools.
5. In order to avoid pressure injury, steel coils are usually not stored in stacks. When steel coils are stacked and stored, the number of stacking layers should be strictly limited, and the steel coils with large weight and size should be placed below.
6. The mechanical properties and partial coating properties of pre-painted galvanized steel coils, as well as pencil hardness, T-bend value, impact energy value, etc., may change with the extension of storage time. Follow the principle of first-in-first-use when using.
7. There should be enough space in the storage site for lifting equipment.
8. Reasonable arrangements should be made for the storage location of steel plates and coils to facilitate access, and unnecessary movements should be minimized.
9. Absolutely avoid being immersed in water.
10. It is not recommended to store a large amount of products in the factory area with more carbon dioxide, and at the same time, try to shorten the storage period of the products that have been stored.

Prepainted,Galvanized,Steel,Coil,suppliers,Prepainted,Galvanized,Steel,Coil,price

RELATED NEWS

The concept of cold rolling and hot rolling

Using continuous casting slabs or blooming slabs as raw materials, heating them in a walking furnace, removing phosphorus with high-pressure water, and then entering the rough rolling mill.

2022

05-09

Advantages and disadvantages of hot rolled steel

By definition, steel ingots or billets are difficult to deform at room temperature and difficult to process. Generally, they are heated to 1100-1250 °C for rolling.

2022

05-11

Characteristics and uses of hot rolled steel coils

Hot-rolled coils are made from slabs (mainly continuous casting slabs). The hot steel strip coming out of the final rolling mill of finishing rolling is cooled to a set temperature by laminar flow, and then coiled into a steel strip coil by a coiler.

2022

05-13

Types and uses of hot rolled steel sheets

Hot continuous rolled steel sheet products include steel strips (coils) and steel sheets cut from them. The steel strip (roll) can be divided into straight hair rolls and finishing rolls (split rolls, flat rolls and slit rolls).

2022

05-17

< 1...212223...31 >

ONLINE MESSAGE

Submit Message