Welcome to Shandong Charming Steel Co.,Ltd !
Tel : 0086 18264535555 E-mail : cmgc@sdcmsteel.cn
How to store pre-painted galvanized steel coil products
1. Pre-painted galvanized steel coils should be stored in a dry and ventilated indoor environment to avoid open storage. Condensation is very likely to occur in places with large temperature differences.
2. The pre-painted galvanized steel coil should be stored in a clean and tidy environment to avoid the intrusion of various corrosive media.
3. The ground of the storage site should be flat, free of hard objects and have sufficient load-bearing capacity.

4. Horizontal steel coils should be placed on rubber pads, skids, brackets and other devices, and the strap locks should be facing upwards, and should not be placed directly on the ground or transport tools.
5. In order to avoid pressure injury, steel coils are usually not stored in stacks. When steel coils are stacked and stored, the number of stacking layers should be strictly limited, and the steel coils with large weight and size should be placed below.
6. The mechanical properties and partial coating properties of pre-painted galvanized steel coils, as well as pencil hardness, T-bend value, impact energy value, etc., may change with the extension of storage time. Follow the principle of first-in-first-use when using.
7. There should be enough space in the storage site for lifting equipment.
8. Reasonable arrangements should be made for the storage location of steel plates and coils to facilitate access, and unnecessary movements should be minimized.
9. Absolutely avoid being immersed in water.
10. It is not recommended to store a large amount of products in the factory area with more carbon dioxide, and at the same time, try to shorten the storage period of the products that have been stored.
Prepainted,Galvanized,Steel,Coil,suppliers,Prepainted,Galvanized,Steel,Coil,price
RELATED NEWS
Features of weather resistant steel plate from China manufacturer
To put it bluntly, weather resistant steel plate from China manufacturer is air corrosion resistant steel. It is a series of high alloy steel products close to the middle of ordinary steel and stainless steel. The weathering steel plate is made of ordinary carbon steel plus a small amount of copper, nickel and other anti-corrosion elements.
2022
01-14
The difference between weathering board and ordinary steel plate
even if it is painted for protection, it will damage the surrounding environment and the steel itself. At this time, the research and development of weathering steel plate has brought a good solution to these problems.
2022
03-04
What is Prepainted Galvanized Steel Coil
Color-coated coils are based on hot-dip galvanized sheet, hot-dip galvanized sheet, electro-galvanized sheet, etc.
2022
03-08
The difference between cold rolled steel plate and hot rolled steel plate
Cold rolling is made of hot-rolled coils as raw materials, which are rolled at room temperature below the recrystallization temperature.
2022
03-10
ONLINE MESSAGE