Welcome to Shandong Charming Steel Co.,Ltd ！
Tel : 0086 18264535555 E-mail : cmgc@sdcmsteel.cn
ONLINE MESSAGE
High quality Prepainted Galvanized Steel Coil at factory Price
Therefore, Galvanized steel coils can be divided into hot-rolled Galvanized steel coils and cold-rolled hot-dip Galvanized steel coils. They are mainly used in construction, home appliances, automobiles, containers, transportation and home industry.
Category :
Details description
Introduction of Galvanized steel coil
Galvanized steel coil is a material produced by a continuous hot-dip galvanizing process with hot-rolled steel strip or cold-rolled steel strip as the substrate. The hot-dip galvanized sheet is supplied in a rectangular flat plate after cross-cutting; the hot-dip galvanized coil is supplied in a coil after being coiled.
Therefore, Galvanized steel coils can be divided into hot-rolled Galvanized steel coils and cold-rolled hot-dip Galvanized steel coils. They are mainly used in construction, home appliances, automobiles, containers, transportation and home industry. Especially in steel structure construction, automobile manufacturing, steel silo manufacturing and other industries. Their main characteristics are: strong corrosion resistance, good surface quality, good for deep processing, economical and practical.
Product Description
|
galvanized steel coil in stock |
|
|
Zinc coating |
40G-275G 40G, 60G, 80G, 100G, 120G, 140G,180G, 200G, 250G |
|
Surface structure |
Zero spangle, regular spangle or normal spangle |
|
Surface treatment |
Chromated and oiled, chromated and non-oiled |
|
Description |
Galvanized steel is mild steel with a coating of zinc. The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel. Galvanized steel is one of the most widely used products, used extensively in the building sector, automotive, agricultural and other areas where the steel needs to be protected from corrosion. |
|
Instruction |
Galvanized steel is steel that has gone through a chemical process to keep it from corroding.The steel gets coated in layers of zinc oxide because this protective metal does not get rusty as easily.The coating also gives the steel a more durable ,hard to scratch finish that many people find attractive.For countless outdoor,marine,or industrial applications, galvanized steel is an essential fabrication component. |
|
Remarks |
Accept the third party test |
|
Thickness/mm |
Weight(kg/㎡) |
Thickness/mm |
Weight(kg/㎡) |
|
0.5 |
3.93 |
2.5 |
19.36 |
|
0.7 |
5.5 |
3 |
23.55 |
|
1 |
7.85 |
3.5 |
27.48 |
|
1.3 |
10.21 |
3.9 |
30.62 |
|
1.6 |
12.56 |
4.5 |
35.33 |
|
2 |
15.7 |
5.5 |
43.18 |
Detailed images
Factory appearance
Packing & Delivery
Our Company
Shandong Chengming Steel Co.,Ltd
Our company supplies cold/hot-rolled stainless steel sheets,stainless steel bars ,stainless steel coil stainless steel pipes,lead plate,bearing steel,spring steel,steel plate pile,tank plate,alloy steel plate,weather resistant steel plate and wear resistant plate to many steel factories from at home and abroad, including Shanxi Taigang Iron& Steel CO,.LTD (TISCO) Zhangjiagang Pohang (ZPSS), Shanghai Krupp, Ningbo Baoxin and steel factories in Taiwan area, Mainland Chinese and foreign countries and regions.
Our annual capacity is 25, 000 tons. The Annual Domestic Sale is 20 million, Annual Exported Sale about 12 million dollars.Our products supplied to more than 20 countries, such as Indonesia, Spain, Japan, Korea, Vietnam, Italy, Israel,Australia, Malaysia, Brazil, Pakistan, U. A. E, Peru, India etc. Good quality has been getting more and more prise from buyers at home and abroad.Our long-term business lines are 304 .202, 201 .430.409L, 304L, 316L, 309S and 310S, Finish: 2B ,BA ,NO.1 NO.4 ,HL, NO.8 and so on . For the sheets and coils,the thickness ranging from 0.3mm to 100mm.For the bars,the diameter ranging from 1mm to 300mm.For the pipes ,we have seamless pipe and weld pipe. Meanwhile, our company is also engaged in the long-term supply of homemade & imported medium and thick plates,galvanized or carbon
ONLINE MESSAGE
RELATED PRODUCTS
Steel Sheet pile Description The steel sheet pile is a kind of steel structure with a linkage device on the edge, and this linkage device can be freely combined to form a continuous and compact steel structure with a retaining wall or a water retaining wall. The steel sheet pile is a type of steel with a lock. Its cross-sections are straight, trough and Z-shaped. There are various sizes and interlocking forms. The common ones are Larsonian, Lakwanaian and so on. Its advantages are: high strength, easy to penetrate hard soil; can be constructed in deep water, if necessary, add diagonal support to become a cage. It has good waterproof performance; it can be formed into cofferdams of various shapes as required and can be reused many times. Therefore, it has a wide range of uses. classification Steel sheet pile products are classified into cold-formed thin-walled steel sheet piles and hot-rolled steel sheet piles according to the production process. (1) There are two types of cold-formed steel sheet piles: non-bite type cold-formed steel sheet piles (also called channel plates) and bite type cold-formed steel sheet piles (divided into L-shaped, S-shaped, U-shaped, and Z-shaped) . Production process: Use thinner plates (commonly used thickness 8mm ~ 14mm) to be continuously rolled and formed in the cold bending unit. Advantages: less investment in the production line, lower production cost, flexible control of product size. Disadvantages: the thickness of each part of the pile body is the same, the section size cannot be optimized, which leads to an increase in steel consumption, the shape of the lock part is difficult to control, the joint is not tightly buckled, and the water cannot be stopped, and the pile body is easy to tear during use. (2) Hot-rolled steel sheet piles Hot-rolled steel sheet piles in the world mainly include U-shaped, Z-shaped, AS-shaped, H-shaped and dozens of specifications. The production, processing and installation processes of Z-type and AS-type steel sheet piles are relatively complicated, and are mainly used in Europe and America; U-type steel sheet piles are mainly used in China. Production process: It is formed by high temperature rolling by a section steel rolling mill. Advantages: standard size, superior performance, reasonable cross-section, high quality, and tight water barrier for the lock bite. Disadvantages: technical difficulty is relatively high, production cost is relatively high, specification series are not flexible. In engineering construction, the application range of cold-formed steel sheet piles is relatively narrow, and most of them are used as supplementary materials for applications. Hot-rolled steel sheet piles have always been the leading product for engineering applications. Based on the many advantages of steel sheet piles in construction operations, the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the National Standardization Management Committee issued the national standard for "Hot Rolled U-shaped Steel Sheet Pile" on May 14, 2007, and on December 1, 2007 Formally implemented. At the end of the 20th century, Maanshan Iron & Steel Co., Ltd. produced more than 5,000 tons of U-shaped steel sheet piles with a width of 400mm with the introduction of the universal rolling mill production line from abroad. The U-shaped steel sheet piles were successfully used in the cofferdam of Nenjiang Bridge and the 300,000 tons of Jingjiang New Century Shipyard. Ton shipyard and Bangladesh flood control projects. However, due to the low production efficiency, poor economic efficiency, low domestic demand and insufficient technical experience during the trial production period, continuous production was not possible. According to statistics, the annual consumption of steel sheet piles in my country remains at about 30,000 tons, accounting for only 1% of the world’s total, and it is limited to permanent projects such as the construction of some ports, wharves, and shipyards, as well as the construction of bridges, cofferdams, and foundation pit support Temporary works. The cold-formed steel sheet pile is continuously rolled and formed by the cold-formed unit, and the side lock can be continuously overlapped to form a steel structure of the sheet pile wall. The cold-formed steel sheet pile is made of thinner plates (commonly used thickness is 8mm-14mm) and processed by cold-formed forming units. The production cost is lower and the price is cheap, and the fixed-length control is more flexible. However, due to the simple processing method, the thickness of each part of the pile body is the same, the cross-sectional size cannot be optimized, which leads to an increase in steel consumption; the shape of the lock part is difficult to control, the joint is not tightly buckled, and the water cannot be stopped; limited by the capacity of cold bending processing equipment, It can produce low-strength ste
The steel sheet pile is a kind of steel structure with a linkage device on the edge, and this linkage device can be freely combined to form a continuous and compact steel structure with a retaining wall or a water retaining wall.
Stainless steel round steel belongs to the category of long products and bars. The so-called stainless steel round steel refers to a long product with a uniform circular cross section
Contact Us
Tel : 0086 18264535555
Email : cmgc@sdcmsteel.cn
WhatsApp：0086 18264535555
Add : Phoenix Industrial Park, Dongchangfu District, Liaocheng City, Shandong Province